Everyone knows how to choose a car. After all, most people drive them every day. But how do you choose a forklifts or used forklifts?
To most people, forklifts appear to be all the same, but when they get down to details, they come with a bewildering variety of options and accessories, lift heights and classes.
What is important to remember is that the forklifts or used forklifts for you is the one that does the job you need, reliably and at a minimum of expense.
Before you start shopping, the basic questions you need to answer about your forklift requirements are:
What surface or environment?
Indoor, outdoor, gravel, concrete, mud/grass? Generally, electric used forklifts are
suitable for indoor use only, batteries and rain don’t mix. Accordingly, electric units are designed around these parameters, with low ground clearance and low profile, long lasting tyres. If you’re going to be outside in a yard for most of the time, you may want to consider an enclosed forklift, or at least one with a roof and windshield, especially if you’re in an area with high rainfall. Going to be driving over crossovers onto roads, or over speedhumps or potholes? Look for a forklift with high ground clearance, and pneumatic tyres which will absorb bumps and uneven ground better. If you are working indoors for more than a few minutes, diesel forklifts are probably not advisable, most of the state industrial safety regulations don’t approve their use inside a factory. For these reasons, LPG is considered a more general choice, able to work indoors and outdoors easily. Cushion tires are only suitable for indoor use, but are very hard wearing and stable. Solid tires will absorb bumps better and last a long time (with regrooving), but can be somewhat unstable on uneven surfaces. Pneumatic tyres are cheap to replace and very cushioning on gravel, mud and bumps, but wear out faster than the other types.
How high do you need to lift?
This is, really what forklifts and used forklifts are for. To lift goods and move them, either into racking or onto trucks. Many people only need to lift one metre off the ground, and just about any forklift you can buy will do that. Others have racking, and if you do, measure the topmost rack and add 200mm to enable the bottom of the pallet to clear the rail. That is the lift height you need to look for when purchasing.
Forklift capacity is measured in tons and lbs. Generally there is some rounding up, eg a 2.5 tons forklift will often be rated to lift 2.42 tones. In addition lift capacity decreases logarithmically with height and length. The larger a load and the higher it goes, the lower the available capacity. Weigh and measure the heaviest pallet or object you intent to lift, and measure your maximum lift requirements. All forklifts and used forklifts should have a load plate that will determine if your requirements can be met.
Unloading Containers or going under low doorways?
If clearance height is an issue, then you will need what is commonly called a container mast. Available in two or three stage (in forklift parlance, a section of mast is called a stage). This in turn will limit the overall height that you can lift, the maximum height you can achieve on a container mast forklift is approximately 4.3 metres. If your racking is higher than this and you need to unload containers, you will probably need 2 different units.
Aisle width restriction or turning circle
Typical factory racking is designed to allow most forklift equipment to load
and unload easily. However if you have narrow aisles or tight turns, you may need a more compact unit, such as a reach truck. Reach trucks come in a variety of brands and are exceptionally high lifters and very compact, however there disadvantages are a more complex control scheme, no weatherproofing and a higher initial cost. Other options can include a walk-behind stacker or compact conventional forklift.
Attachments / other special features
New Forklifts and used forklifts are designed to lift pallets, however they can be adapted to a wide variety of applications. We can supply sideshifts (useful for tight spaces), fork positioners (if you need to lift different sized pallets), rotators for drums and rolls, carpet poles for carpet or fabric, jibs for lifting engine blocks and the like and many, many more types of attachments. The most common are sideshifts, which are highly sought after as they allow the tynes to be repositioned on the fly, increasing loading speed. The best attachments to look for are the ones you need, there is no point in paying for something you don’t really need.
This is what people generally consider first, and while it is very important to stay within budget, it’s more important to end up with a forklift that does the job you need it to do. Cost will dictate the features you end up with, the weight capacity and the age of the unit. The simplest way to evaluate your needs is to think of it like this:
Now pick two, e.g. – you can get a cheap forklift in good condition, but it may only lift 1.5 tons and have no sideshift. Or you can get a model with more hours that lifts more weight and has good specifications at a good price but it will be older and in poorer condition. You must carefully consider what specifications are important to you and balance these against the cost of the unit. Look for an upcoming post on the various purchasing methods available.
Before comparing units, try to make a list of all your ‘must haves’ and all your ‘would like to have’ features before you begin looking, like this
- 3.5 metre lift height
- Cost under $10,000
- 2 tonne minimum capacity
Would like to have
- Solid Tyres
We hope this guide was helpful to you. Remember to check out our used forklifts. Don’t forget we are just a phone call (952-492-3900) or email away, even if you end up purchasing elsewhere, give us a call to compare models and pricing.